Hurlingham Walk, Carnwath Road, Fulham, SW6 3DP

This stunning residential project utilised wet cast stone supplied by Marshalls over a period of eighteen months concluding in the summer of 2016, in Fulham.

The scheme located in the borough of Hammersmith and Fulham consists of one, two and three bedroom apartments and came about in direct response to the demand for residential accommodation within the borough.

The design brief was to include a well-proportioned and thoroughly considered scheme which enhances the various streetscapes with a form that harmonises with the surrounding context.

The area had been a mismatch of residential and low rise industrial and commercial units that had in part lost direction to the detriment of the existing surrounding residencies.

The project is built upon former low rise industrial units thus reinstating and enforcing the new direction and local planning briefs.

Marshalls had to undertake a higher level of project management on the scheme as the site was limited in both access and storage. The building itself commanded a large footprint and the main frame was completed before the external cladding was erected. High levels of co-ordination were employed to ensure components were supplied elevation by elevation on lift by lift as work progressed.

In addition to the full window surrounds, columns and feature bands, Marshalls supplied custom oversize blockwork adjacent to the main entrance, balcony cladding bands and the roof level cornice and copings.

The cornice at roof level was supplied in lengths of approximately 2.4 to 3m and as per the fore mentioned tight restrictions to site and limited storage, the manufacture and supply of these cornice components were required to be co-ordinated critically with the build programme to ensure the correct pieces arrived on site in the correct order. Failure to do so could literally bring the build to a stop. The cornices were supplied continuously over a period of weeks from commencement to completion. Fixing solutions were also sought to restrain the top heavy units that offered 3 dimensional tolerance to ensure line and level across the installation.

The balcony cladding proved to be a further challenge as the in-situ concrete backing complete with upstand was to be clad with a combination band coping , T shaped in section that had very limited working space and a special fixing system had to be developed between main contractor, sub-contractor, Marshalls and specialist fixing supplier. GreconUK also undertook a site survey with themain contractor to establish and confirm the curved work to the balconies above the main entrance to ensure a consistent ‘fit’ to the structure.

In addition to the above, all the balconies required special pieces than maintained a smooth transition from the adjacent feature band to the coping, whether as a continuation of line or to include perpendicular or irregular angles. These transitions had to take into account building movement joint positions or include special joints for the ‘floating’ balconies.
Exterior and balconies of apartment building
Apartments with cast stone detailing overlooking a landscaped garden
Apartments with cast stone detailing overlooking a landscaped garden
Nighttime view of cast stone detailed apartments overlooking a landscaped garden
Cast stone detailing on exterior of apartment block
Cast stone balconies overlooking nighttime garden
Wet cast stone supplied by Marshalls