The Garden Visualiser can be used across a variety of platforms and operating systems. By creating an account with us, you will be able to access all your designs from any device that supports the Garden Visualiser by simply logging in.
To create an account, click the Create Account underneath the log in button. Once clicked, simply fill in the form with your details. Press the Create an account button and you will automatically be logged into your account.
If you've forgotten your password, just click on the Forgot Password? button underneath the login button and follow the onscreen instructions.
On the Visualiser Projects screen (the first screen after you have successfully logged in), click on the + symbol in the top left corner to begin creating a new project.
There are three different movement options as well as stock angles that can be used to navigate around your project. See the other entries in this section for more information.
These arrows allow you to move the camera from side to side and forwards and back. The closer you are to the centre of the arrows the slower the camera will move in your chosen direction.
The slider allows you to move the camera up and down (lower and raise). The closer to the centre point of the slider, the slower the camera will rise/lower in your chosen direction.
By clicking and holding, you will be able to change the angle at which you can view your project. This changes the view from where you've positioned your camera. The further you move the mouse from the original click point the faster the camera angle will move.
Since the Garden Visualiser is a 3D design tool, it can take a little bit of practice before getting the hang of it but once you do you'll be flying around your landscape project in no time. Alternatively you could try using some of our stock camera angle views.
Select and highlight the product you wish to change by double clicking on it. Along the bottom of the screen you will be presented with several options. Click on the Change Product option and simply select the product you wish to replace your current selection with.
You can add as many products as you like! Simply select the type of product you'd like to add from the selection bar found at the bottom of the app.
Select and highlight the product you wish to move by double clicking on it. Along the bottom of the screen you will be presented with several options. Click on the Move option and move your product accordingly.
If you place a feature, it may not appear if it renders in the same place as another product. This is because the visualiser isn't sure which is more important to display. To make your feature visible, either click on a visible part of the feature, or click on the paving area covering it. Use the on-screen slider (control on the right side of the screen) to raise or lower the feature/paving slightly so that the feature can be seen.
Select and highlight the feature you wish to change by double clicking on it. Along the bottom of the screen you will be presented with several options. Click on the Change Product option and simply select the product you wish to replace your current selection with.
Select and highlight the feature you wish to move by double clicking on it. Along the bottom of the screen you will be presented with several options. Click on the Move option and reposition your product accordingly.
Select your chosen product, be it a path, kerb or edging. Once selected click where you wish start of your path/edging to begin and draw out the desired shape. Unlike, paving where the start and end point need to meet, paths and edgings don't. Simply double click when placing the last point to end the laying process.
Pick your chosen product and once selected click where you wish to start your path and draw out the desired shape. Unlike, paving products where the start and end point need to meet, walls don't. Simply double click when placing the last point to end the laying process.
You can place as many walls as you wish.
If your chosen product has the option to add pillars, it can be viewed by double clicking on the placed wall. Once selected, the options menu will load along the bottom of the visualiser and the option to Add Pillar will be shown if it is available for that product. Once you've added a pillar into your project, simply position it where you desire.
If you wish to change the height or product of your wall, double click and select Change Product from the options along the bottom. From this screen you can change the height of your wall. To change the product, click on Walling in the upper left corner of the window.
Unfortunately, we are unable to provide scalable buildings at this moment in time.
Not at all, you can use our stock image of a house by simply selecting the “Use our house” option on the Add Your House menu.
The Find a Stockist requires you to type in a postcode. Once your postcode has been entered, you will be shown the 10 nearest Marshalls stockists in that area.
To receive a PDF of your project information, click on the share icon in the top right (third from the right), type in your email and press Send Project PDF.