Jointing Sand for Block Paving
Joint Filling Sand
Jointing sand is one of the most essential finishing touches to your block paving project. Marshalls supplies and can advise on the best use of this vital landscaping component.
Marshalls Joint Filling Sand is a special kiln dried sand, suitable for use with all types of block paving. The paving sand is available in 25kg bags to ensure your patio or driveway receives enough coverage.
Depending on the thickness of the paving you’ve installed, you’ll cover varying distances with jointing sand – up to eight square metres for 50mm paving, and an average of 4.5m2 for 80mm paving.
Joint Filling Sand is one of the many jointing sand products for use within our driveways range.
For more information and inspiration on how to get the best use from your jointing sand, watch our how-to video guides
Product Colours and Sizes
|Joint Filling Sand 25kg|
* Sizes shown are Length x Width x Thickness
Product Reference: WEBFA051010
Cleaning and Maintenance Guidelines
Buy Today From Approved Online Retailers
Marshalls Hard Landscape Guarantee covers material defects for a full 10 years and covers installation defects for 5 years - Only available via a Marshalls Registered installer.
* Excludes Richmond paving, Pendle paving and Weatherpoint.