Woodstone^® Paving

For more information or specific documents for Woodstone® Paving contact our team to find out more.

Please see specification details below.

Due to the nature of this product and the manufacturing process, some variation may occur. Where images are viewed online or in printed material, we cannot guarantee that the colours shown directly reflect the colours of the actual product.

• Paving should be bedded on a full bed of mortar.
• Utility, Urbex, Textured Utility, Standard Pimple, Saxon, Richmond, Perfecta, Pendle and Argent paving should be jointed using traditional mortar or Weatherpoint 365.

  Woodstone, Firedstone and Heritage should be jointed only with a traditional mortar mix.

• Although performance is good, sizes and colours will be limited, and finish may be varied.
• Sizes listed assume a minimum of a 10mm joint width.
• Concrete products are made from naturally occurring materials, which means these materials can vary in colour, resulting in a slight variation in a finished product.
• Despite the use of quality materials, modern and up-to-date manufacturing techniques and quality control, variation between production batches can occur. Whilst any differences are generally quite minor, they will be noticeable when units from two production batches are laid consecutively within a single area.
• We would always advise that batch codes are checked to reduce the risk of product variation and ensure consistency of finish. To prevent this, when multiple packs are being laid in one consecutive area, please ensure you check that they are all from the same production. The batch label will display the product code, with the first two letters identifying the works of origin and the week number indicating which week of the year the product was produced.
• All building materials should be protected from bad weather, both during storage and after initial installation.
• Movement joints should be considered for large areas